REGULATED HIGH VOLTAGE POWER SUPPLY
10kV to 60kV, 400µA/1mA
REGULATED HIGH VOLTAGE POWER SUPPLY
10kV to 60kV, 400µA/1mA
This series of power supplies incorporate the high frequency switch mode technology to give highly regulated panel mountable portable units with kV range varying from 10kV to 60kV catering to a wide variety of scientific and industrial applications.
Download Datasheet 
TECHNICAL SPECIFICATIONS
| PARAMETER | SPECIFICATION |
|---|---|
| Input Voltage | 115V or 230V± 10% AC, 50Hz, single phase |
| Output Voltage* | 0 to 10/20/30/40/50/60kV DC |
| Output Current* | 0 to 400µA / 1mA |
| Polarity* | Positive / Negative |
| Line Regulation | <0.05% for±10% variation in input voltage |
| Load Regulation | <0.01% for 10 to 100% load variation |
| Stability | <0.01%hour after 1 hour warm up |
| Regulating Mode | Constant Voltage |
| Voltage control(From zero to rated kV) | By external 10-turn potentiometer with lockable counting dial |
| Protections | Against overload, arc and short-circuit During short circuit, power supply trips & to be manually reset to restart |
| Front Panel | Power ON/OFF switch
HV ON/OFF switch with indication 3½ digit voltage and current meters 10-turn potentiometers for voltage and current control Constant voltage – constant current mode indication LED indications for faults |
| Back Panel | 10pin terminal block Fuse holder with fuse RF connector for HV output Stud for grounding the unit |
| Topology | High Frequency Switch Mode |
| Size (W x D x H) | 10″ x 10″ x 5″ for 10kV to 50kV & 11″ x 11″ x 6″ for 60kV |
| Output cable | 1.5meters of HV DC cable |
*Optional. To be specified by the user.