HF X-rAY GENERATOR FOR NDT SYSTEM
Home | HF MONOBLOCK FOR NDT SYSTEM
HF X-RAY GENERATOR FOR NDT SYSTEM
125kV / 160kV / 220kV, 5mA
This series of power supplies have been designed and developed for OEM application requiring continuous operation for NDT inspection in various fields.
Non -destructive testing is extremely valuable for evaluation, troubleshooting, research, and quality control in science and industry.
These compact high frequency units have to be connected to an X-Ray tube to generate X-Rays and are available in 3 models 125kV, 5mA; 160kV, 5mA and 220kV, 5mA. The high frequency output allows for lower kV per exposure and superior imaging for better evaluation.
Download Datasheet
TECHNICAL SPECIFICATIONS
| PARAMETER | SPECIFICATION | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Input Voltage | 230V ±10% A C, 50Hz, single phase | |||||||||||
| No. of Output | 2 | |||||||||||
|
| |||||||||||
| Output Current | 0 to 5mA | |||||||||||
| Filament Voltage and Current As per tube selection by OEM | As per tube selection by OEM | |||||||||||
| Polarity | Positive and negative | |||||||||||
| Line Regulation | <0.1% for 10% variation in input voltage | |||||||||||
| Load Regulation | <0.5% for 10% load variation (tube current) | |||||||||||
| Mode of Operation | Constant voltage-constant current (x-ray anode current) | |||||||||||
| Protections | Overload, short-circuit and arc | |||||||||||
| Topology | SMPS | |||||||||||
| Cable and Connectors | To be supplied by the OEM | |||||||||||
|
|